Journal of Powder Materials

Seongwon Kim

3 Articles

Preparation of Suspension in La₂O₃-Gd₂O₃-ZrO₂ System via Planetary Mill and Characteristics of (La_1-xGd_x)₂Zr₂O₇ Coatings Fabricated via Suspension Plasma Spray: Chang-Sup Kwon, Sung-Min Lee, Yoon-Suk Oh, Hyung-Tae Kim, Byung-Koog Jang, Seongwon Kim; J Powder Mater. 2013;20(6):453-459.; DOI: https://doi.org/10.4150/KPMI.2013.20.6.453

27 View
0 Download
4 Citations

Lanthanum/gadolinium zirconate coatings are deposited via suspension plasma spray with suspensions fabricated by a planetary mill and compared with hot-pressed samples via solid-state reaction. With increase in processing time of the planetary mill, the mean size and BET surface area change rapidly in the case of lanthanum oxide powder. By using suspensions of planetary-milled mixture between lanthanum or gadolinium oxide and nano zirconia, dense thick coatings with fully-developed pyrochlore phases are obtained. The possibilities of these SPS-prepared coatings for TBC application are also discussed.

Citations

Citations to this article as recorded by

Phase Equilibria in the ZrO2–La2O3–Gd2O3 System at 1600°C
E.R. Andrievskaya, O.A. Kornienko, A.I. Bykov, A.V. Sameliuk
Powder Metallurgy and Metal Ceramics.2020; 58(11-12): 714. CrossRef
Characteristics of Bulk and Coating in Gd2−xZr2+xO7+0.5x(x = 0.0, 0.5, 1.0) System for Thermal Barrier Coatings
Sun-Joo Kim, Sung-Min Lee, Yoon-Suk Oh, Hyung-Tae Kim, Byung-Koog Jang, Seongwon Kim
Journal of the Korean Ceramic Society.2016; 53(6): 652. CrossRef
Fabrication and Characterization of Ceramics and Thermal Barrier Coatings of Lanthanum Zirconate with Reduced Rare-earth Contents in the La2O3-ZrO2 System
Chang-Sup Kwon, Sujin Lee, Sung-Min Lee, Yoon-Suk Oh, Hyung-Tae Kim, Byung-Koog Jang, Seongwon Kim
Journal of Korean Powder Metallurgy Institute.2015; 22(6): 413. CrossRef
Structure and Thermal Conductivity of Thermal Barrier Coatings in Lanthanum/Gadolinium Zirconate System Fabricated via Suspension Plasma Spray
Chang-Sup Kwon, Sung-Min Lee, Yoon-Suk Oh, Hyung-Tae Kim, Byung-Koog Jang, Seongwon Kim
Journal of the Korean institute of surface engineering.2014; 47(6): 316. CrossRef

Thermal Durability of 4YSZ Thermal Barrier Coating Deposited by Electron Beam PVD: Chanyoung Park, Younghwan Yang, Seongwon Kim, Sungmin Lee, Hyungtae Kim, Daesoon Lim, Byungkoog Jang, Yoonsuk Oh; J Powder Mater. 2013;20(6):460-466.; DOI: https://doi.org/10.4150/KPMI.2013.20.6.460

19 View
0 Download

Abstract PDF: 4 mol% Yttria-stabilized zirconia (4YSZ) coatings with 200µm thick are fabricated by Electron Beam Physical Vapor Deposition (EB-PVD) for thermal barrier coating (TBC). 150µm of NiCrAlY based bond coat is prepared by conventional APS (Air Plasma Spray) method on the NiCrCoAl alloy substrate before deposition of top coating. 4 mol% YSZ top coating shows typical tetragonal phase and columnar structure due to vapor phase deposition process. The adhesion strength of coating is measured about 40 MPa. There is no delamination or cracking of coatings after thermal cyclic fatigue and shock test at 850°C.

Fabrication and Characteristics of Yttria-stabilized Zirconia (7.5 wt% Y₂O₃-ZrO₂) Coating Deposited via Suspension Plasma Spray: Won-Jun Lee, Chang-Sup Kwon, Seongwon Kim, Yoon-Suk Oh, Hyung-Tae Kim, Dae-Soon Lim; J Powder Mater. 2013;20(6):445-452.; DOI: https://doi.org/10.4150/KPMI.2013.20.6.445

22 View
0 Download
2 Citations

Abstract PDF

Yttria-stabilized zirconia (YSZ) coatings are fabricated via suspension plasma spray (SPS) for thermal barrier applications. Three different suspension sets are prepared by using a planetary mill as well as ball mill in order to examine the effect of starting suspension on the phase evolution and the microstructure of SPS prepared coatings. In the case of planetary-milled commercial YSZ powder, a deposited thick coating turns out to have a dense, vertically-cracked microstructure. In addition, a dense YSZ coating with fully developed phase can be obtained via suspension plasma spray with suspension from planetary-milled mixture of Y_2O_3 and ZrO_2.

Citations

Citations to this article as recorded by

Fabrication and Characterization of 7.5 wt% Y2O3-ZrO2Thermal Barrier Coatings Deposited by Suspension Plasma Spray
Won-Jun Lee, Yoon-Suk Oh, Sung-Min Lee, Hyung-Tae Kim, Dae-Soon Lim, Seongwon Kim
Journal of the Korean Ceramic Society.2014; 51(6): 598. CrossRef
Structure and Thermal Conductivity of Thermal Barrier Coatings in Lanthanum/Gadolinium Zirconate System Fabricated via Suspension Plasma Spray
Chang-Sup Kwon, Sung-Min Lee, Yoon-Suk Oh, Hyung-Tae Kim, Byung-Koog Jang, Seongwon Kim
Journal of the Korean institute of surface engineering.2014; 47(6): 316. CrossRef

Author index